Solenoid Valves
Solenoid Operated Diaphragm Valves
- All wetted parts are PFA and Kalrez for high purity and
corrosion resistance
- Wide range of voltages to select from
- Powerful but compact coil design
1/8" Orifice, 2-Way, Normally Closed
Specifications
- Inlet Pressure Range: 2 PSIG (13,79 kPa) minimum to 50 PSIG (344.75 kPa) maximum
- Temperature Range: 0° to 100°F (-17° to 37°C), ambient for continuous duty; 0° to
175°F (-17° to 79°C) , fluid
- Flow Factor: Cv.25,Kv 3.6
- Typical Cycle Speed: 2 seconds
- Materials: all wetted parts are PFA, with Kalrez seal
- Coil Temperature: 185°F (85°C) for continuous duty with ambient and fluid at 70°F
(21°C)
Electrical Specifications of Solenoid Operation
- Wire Leads: two leads, length 18 (457mm)
Note
Not rated for vacuum applications
1/4" Orifice, 2-Way, Normally Closed
Specifications
- Pressure Range: 27" Hg vacuum (913mbar) to 70 PSIG (483 kPa)
- Temperature Range: 0° to 100°F (-17° to 37°C), ambient for continuous duty; 0° to
175°F (-17° to 79°C), fluid
- Flow Factor: Cv.74,Kv 10.6
- Cycle Speed: .2 seconds Materials: all parts are PFA, with a
Kalrez seal. Additional materials used for non-wetted parts include stainless steel
- Coil Temperature: 190°F (88°C) for continuous duty with ambient and fluid at 70°F
(21°C)
Electrical Specifications for Solenoid Operation
Wire Leads
- Red: Voltage source, length 12" (305mm)
- White: Neutral, length 12" (305mm)
- Green: Ground, length 12" (305mm)
1/4" Orifice, 2-Way, Normally Opened
Specifications
- Temperature Range: 0° to 100°F (-17° to 37°C), ambient; 0° to 175°F (-17° to
79°C), fluid
- Flow Factor: Cv.74,Kv 10.6
- Typical Cycle Speed: .2 seconds
- Materials: all wetted parts are PFA, with a Kalrez seal.
Additional materials used for non-wetted parts include stainless steel
- External Coil: 170°F (88°C) for continuous duty with ambient temperature and fluid at
75°F (21°C)
Electrical Specifications of Solenoid Operator
Wire Leads
- Red: Voltage source, length 12" (305mm)
- White: Neutral, length 12" (305mm)
- Green: Ground, length 12" (305mm)
1/4" Orifice, 3-Way
Specifications
- Temperature Range: 0° to 100°F (-17° to 37°C), ambient for continuous duty; 0° to
175°F (-17° to 79°C), fluid
- Flow Factor; When using inlet port 2 - Cv .95, Kv 13.6. When using inlet port 1 or 3 -
Cv .89, Kv 12.7
- Cycle Speed: .2 seconds
- Materials: all wetted parts are PFA with Kalrez seals.
Additional materials used for non-wetted parts include: PVDF, Tefzel, and stainless steel
- Coil Temperature: 190°F (88°C) for continuous duty with ambient and fluid at 70°F
(21°C)
Electrical Specifications of Solenoid Operator
Wire Leads
- Red: Voltage source, length 12" (305mm)
- White: Neutral, length 12" (305mm)
- Green: Ground, length 12" (305mm)
Click here to see Photos of Solenoid Valves
|
